 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TRENDnet TRENDware, USA TE100-DM24 The TE100-DM24 dual speed SNMP stackable master hub provides a phenomenal level of flexibility and ease of use for migration to higher bandwidth network environments. Each port auto-senses between 10Mbps Ethernet and 100Mbps Fast Ethernet. Once the port speed is determined, the hub creates independent segments for the 10Mbps and 100Mbps ports. Linking the 10Mbps and 100Mbps segments together is achieved through an optional switch module. What's Next in Networking 24-port 10/100Mbps Dual Speed SNMP Stackable Master Hub The optional TE100-DSM switch module can be installed in any hub in the stack, making it possible to transparently bridge between 10Mbps and 100Mbps segments. In a managed hub stack, more than one TE100-DSM module can be used to provide automatic redundancy. The TE100-DM24 is a SNMP Master hub which will control up to four TE100-DS24 stackable hubs via integrated management ports. A stack of TE100-DM24/DS24 hubs operates as a class II Fast Ethernet repeater, allowing linkage to another Class II Fast Ethernet Stack in the same collision domain. One 100Base-TX switched port module and one switched 100Base-FX port are also available, in addition to the TE100-DSM switch module, for greater configuration flexibility. FEATURES Plug and Play installation with automatic port configuration Supports 24 10/100Mbps auto-sensing and auto-negotiation ports Uplink port provides easy expansion to another hub Stackable to five units for a total of 120 ports Scalable expansion of up to two stacks for a total 238 ports One management hub) controls an entire stack of dual speed hubs (max. four hubs) TE100-DM24 stacks can make use of additional switch modules for redundancy EIA-19" rack mountable High visibility LED indicators provide status for each port Bandwidth utilization LED array for traffic volume display Automatic Hub ID assignment and front panel display Built-in auto-partitioning instantly isolates network failures One RS-232 port allows local terminal access to hub configuration, diagnosis, and firmware upgrade Slide-in switch module allows bridging between 10Mbps and 100Mbps segments, just one switch module is required for entire stack Slide-in switch module for one 100Base-TX connections or one 100Base-FX connection 5 Year Warranty BENEFITS Upgradable: Ethernet workgroups can be upgraded to Fast Ethernet without changing hubs. Expandable: Connect up to 120 users per stack. Also stackable with TE100-D16s hubs. Flexible: All 10 and 100Mbps users can exist on one hub. Cost Effective: Provides 10Mbps and 100Mbps SNMP stackable hub, and 10/100Mbps switch functionality in one unit. Performance: Full 100Mbps connectivity significantly boosts network performance. TE100-DM24 (11-17-2002) TE100-DM24 24-port 10/100Mbps Dual Speed SNMP Stackable Master Hub SPECIFICATIONS Standards: * IEEE 802.3 100Base-TX/100Base-FX, and IEEE 802.3 10Base-T Protocol: * CSMA/CD Speed: * 10Mbps for 10Base-T * 100Mbps for 100Base-TX Cabling: * CAT 3, 4, 5 UTP/STP for 10Base-T * CAT 5 UTP/STP for 100Base-FX 62.5/125 micron multi mode SC fiber (2km) Daisy-Chain Port: * SCSI 50 pin x 2 Console Port: * DB-9 (9 pin) DCE RS-232 x 1 Power: * Internal Power Supply, (100 - 240V, 50/60Hz) LED's: * Per Hub: Power, Collision (10, 100) Slot 1 or 2, Hub ID, Bandwidth Utilization %, Console and SNMP * Per Port: Link/Rx, Auto Partition, Disable, Port Speed (10Mbps, 100Mbps) Dimensions: * 441 x 237 x 55 mm 17.36" x 9.33" x 2.17" (L x W x H) Weight: * 3.87 kg / 8.53 lb. Temperature: * Operating: -10 to 55 C / 14 to 131F * Storage: -25 to 80 C / -13 to 176F Humidity: * 5% to 95% (non-condensing) Certification: * FCC, UL, VCCI, CSA, C-tick, TUV, CE UL R (R) NETWORKING SOLUTIONS PRODUCT INFORMATION TE100-DM24: 24-port 10/100Mbps dual speed SNMP stackable Master hub TE100-DS24: 24-port 10/100Mbps dual speed stackable hub TE100-DSM: 10/100Mbps switch slide-in module TE100-DFXM: Switch 100Base-FX slide-in module TE100-DTXM: Switch 100Base-TX slide-in module ORDERING INFORMATION TRENDware International, Inc. 3135 Kashiwa Street Torrance, CA. 90505. USA Tel: 310-891-1100 Fax: 310-891-1111 Web: www.trendnet.com Email: sales@trendware.com R To Order Please Call: 1-888-326-6061 TRENDnet TRENDware, USA TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this http://www.TRENDNET.com. document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit ____________________ Copyright (c) TRENDware International, Inc. 2004. All Rights Reserved. |
Price & Availability of TE100-DFXM
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |